Ghost 2 Immobiliser Problems
The Ghost 2 immobiliser, designed to protect cars from key cloning or hacking, is a small device that can be installed without damaging your vehicle. It prevents your vehicle from starting unless you press an exact sequence of keys inside your vehicle, similar to the password of the phone.
Stop/Start
Ghost immobilisers prevent vehicles from being stolen by preventing the engine from running until it has received the correct PIN code. This is accomplished without altering the vehicle, and is largely undetectable by thieves. The unit communicates with the ECU on the CAN data bus, which allows it to lock the vehicle. This is the same system the ones used by car manufacturers for many years. However, thieves cannot escape it using a new key, or key relay technology, like they can do with factory-installed systems.
A Ghost can be fitted to any car, van motorhome, caravan, or bike with an engine. It is compatible with all major brands of vehicles. The same system is also compatible with electric cars. It's an excellent alternative to wheel clamps and steering wheel locks.
When the Ghost is activated, it will stop all buttons in your car, preventing the ignition being started without the PIN code. You can enter the code manually or via the Android or Apple app. If the wrong code is entered, the app will display an indicator light. The Ghost will then refuse to let the vehicle to be restarted. This is a great deterrent, and in the event that the vehicle cannot be started the thief will move on to another victim.
The Ghost is a small, weatherproof device that is able to be hidden away in the most inaccessible areas of your vehicle. Installation takes between 20-30 minutes for each vehicle. It is also easy to remove if you decide to switch your vehicle or return it for service or valet parking. It is a TASSA (Tracking and Aftermarket Security Systems Association) insurance approved system that is recognised by a number of insurance companies. It is also equipped with a secure emergency Pin Code override and features a Service/Valet mode that can be activated with a button on the app or with your key fob.
Disarm
Ghost immobilisers, unlike mechanical anti-theft devices that can be removed, are hidden inside the vehicle. They are virtually impossible to hack or bypass and, even if they are discovered, thieves will not be able to start the engine. This is because ghost immobilisers prevent key cloning, signal jamming and device spoofing - techniques that are frequently used by thieves to gain entry into vehicles that have standard immobilisers.
An immobiliser functions by sending an electronic code to the ECU (electronic control unit). If a wrong code is received and the vehicle is not started as the engine will not fire up. Although it is possible to disable the ghost immobiliser with software, this is very time-consuming and difficult. The software can only be installed and operated by a authorized installer.
The Ghost immobiliser, which is a tiny device, is hidden within the vehicle's wiring loom. It is not visible to the naked eye once installed. It will not show up on diagnostic systems, there aren't LED indicators and it will not connect to the engine via the OBD port. It communicates silently via the CAN data circuit.
The system will not allow the vehicle to start unless it is provided with an input PIN code that is entered by the user. This is entered through buttons on the steering wheel, door panels or centre console. This is a better way to safeguard the car since it doesn't require a remote control or key fob.
In addition, Ghost offers a service mode which can be activated through the application on your mobile phone. This will allow you to give your keys to a person for servicing or valet parking without entering the disarm sequence.
No matter if your Ghost is in service mode or not you should not attempt to remove the system yourself because it could affect your engine and cause damage. It is recommended to contact a TASSA verified installer who can remove the system safely and correctly. Our most recent GHOST II immobilisers come with a special QR fingerprint sticker that is hidden in various areas of your vehicle, these are linked to our global security register. In the event the system is removed and then sold on the black market it will be linked back to the original owner.
ghost immobiliser 2 -Hijack
Ghost Immobiliser 2 has a highly effective anti-hijack function. This system is a smart key that protects your car from thieves. If the ignition switch is turned to on, and the car is stationary for 30 seconds and the Ghost system will automatically stop the engine and turn on the hazard lights on. This allows the driver or passengers time to press a hidden security button (depending on the vehicle) before the system is activated and the engine is once again allowed to start.
The Ghost system, unlike most competitors, uses a timer and controller unit that shuts off the valve for shut-off of fuel 14 after a predetermined time. This happens regardless of whether the ignition is on. This delay time period needs to be long enough to allow the hijacked owner of the vehicle to drive away from the location of the incident and to maintain a sufficient distance from the vehicle in which it is stuck before the system can be activated.
The Ghost comes with an additional layer of security that prevents common hacking methods used to gain entry into modern cars like relay attacks and key range expanding. The Ghost system communicates in a silent manner and does not emit signals that can be picked by a thief with codes-grabbing or RF scanning technology.
The Ghost system has an option for service or valet mode which allows your vehicle to be re-started and driven without the requirement for a PIN code. This is perfect if you are parking your vehicle and have to leave it for a short period of time, such as for example to put groceries in the boot, or open a garage door, etc. The system will end the service mode based upon speed and time or through the simple input of a PIN code process. This will give you complete assurance that only you can drive your car!
Keyless Entry
With the increasing trend of contactless car theft numerous customers are seeking out additional security options. This is especially applicable to those who have put in time or money into personalising their vehicles and own expensive or rare vehicles. A supplementary immobiliser is an effective way to avoid this kind of theft since it will stop your vehicle from starting unless the right pin code is entered on your key fob.
Immobilisers are designed to intercept the various circuits in a vehicle, including ones that control the starter motor and fuel pump. They can also shut off the alarm for cars in order to draw attention and ward off potential thieves.
These devices communicate with the engine control unit (ECU) via the CAN data circuit and they stop thieves from trying to get around it by installing a brand new ECU or by using the key programmer. The immobilisers are fitted in a discreet manner and leave no trace on your vehicle. They are also unnoticeable by hi-tech thieves' tools.
In contrast to other systems that require a specific app, or a tag that is worn on the person carrying it and a Ghost immobiliser can only be deactivated by pressing a series of existing electronic buttons on your steering wheel, door panel, and the centre console, which allows you to select a customized pin sequence. The pin can be changed as often as you'd like, meaning it is as secure as a credit card. It can be even more difficult to break because it requires up to 20 presses.
Ghost also has a Valet/Service mode that allows you to disable it if you are going to hand over your vehicle for valet parking, or service. This allows the system to operate within the parameters like a 30-mph speed limit. The system can be reactivated with the original key or corresponding entry code.
This makes it the most efficient and secure aftermarket CAN-based immobiliser on the market, and is insurance-approved by Thatcham as an accessory for your car when fitted by one of our certified installers. The Ghost 2 immobiliser is also equipped with six QR fingerprint labels and an ISR contact card that contains your unique QR code and an emergency code that is secure that can be kept in the purse or wallet of your vehicle.